While painting my house, the 2 lead wires that feed into the back of both my outside security cameras got pulled out. Unfortunately, the original tech wired them super tight, so merely pulling off the rubber boot, pulled the wiring out of the jack.
If you pull off the rubber boot at the bottom, there is a cat 5 connector that plugs into the back of the camera.
There are only 2 wires, that lead into the cat 5 connector.
Would someone be so kind to tell me where on the 8 plug jack, those 2 wires lead to left to right when viewed from the top (locking tab) side.
I can switch the two wires back and forth, but it will be much easier if someone can tell me where theirs lead or if it even matters at all.
Im in Denver in case there is "region specific" wiring.
Thank you in advance!
